AEMC PEL 102 Calibration Metrology
chevron_left chevron_right


Power and Energy Logger, Single, Dual and Three-Phase, with Three MA193-10-BK Sensors, No LCD Display

$ 1,023.75 (tax incl.) $ 1,023.75 (tax excl.)
No tax


The AEMC PEL 102 (2137.51) is a low cost, simple to use, one, two (split phase) and three phase power/energy data logger. This product is ideal for electricians, engineers and contractors doing work in the area of building and system monitoring and upgrades, as well as residential and overall energy audits. All vital energy data is easily measured, recorded, and analyzed. Reports can be generated with confidence with minimal configuration time and effort (Standard and Customizable Reports supplied).

The PEL102's design enables it to be installed inside a load center panel (including the current sensors) allowing the door to close on most panels. The PEL 102 offers all the essential functions for logging power/energy data from most electrical power networks in use today across the world (17 network set-ups provided). The PEL102 energy logger measures and records three voltage inputs and current inputs, Watts, VARS, VA and Energy (kWh and kVA). Power Factor (PF), Displacement Power Factor (DPF), Crest Factor, Frequency and THD are calculated and recorded as well. Individual harmonic % information from 1 to the 50th harmonic are recorded at the operator's choice. All variables are recorded and stored at a one second interval and on user selectable demand intervals from 1 to 60 minutes.

The included, comprehensive DataView software also provides the ability to view data from several hundred PEL units on a local network or over the internet providing the ability to evaluate energy usage on a department or facility basis anywhere in the world. Real-time data can be reviewed as well as downloading stored results for analysis and report generation.

Configuration of the PEL-102 (2137.51) takes place through the DataView software either locally or remotely. Most of the configured parameters are pre-set in the instrument keeping the user interface simple and straightforward and easy to complete in a few minutes. Current probes are automatically defined and calibrated when they are plugged into the unit. User selections include network type, demand interval, recording length, voltage and current ratios where necessary, recording duration (defined either by time and/or date) and communication method. Pass word protection can be initiated for Bluetooth and network communication to guard against unauthorized access and protection of data integrity.

The DataView software provides the ability to review power, harmonic and RMS data in real time and to download recorded sessions for more extensive analysis and report generation. One second trend and demand interval trend graphs and tabular listings can be displayed and printed out. Energy costs can be calculated. Source and load graphs can be plotted. Individual phase and the sum of all phases can be evaluated. Once on screen, the user has access to a variety of analytical tools to analyze individual data points or sections of the recorded data without the frustration with having to deal with layers of button pushing to get to the information you need.

New product
  • 1 - Small Classic Tool Bag
  • 3 - MiniFlex MA193-10-BK Sensors
  • 1 - 5 ft USB Cable
  • 4 - Black Test Leads and Alligator Clips
  • 1 - Power Cord
  • 12 - Color-coded ID Markers
  • 1 - Safety Card
  • 1 - Sensor Compliance Sheet
  • 1 - 2GB SD-Card
  • 1 - Quick start guide
  • 1 - USB Stick with DataView software
  • 1 - User manual

Product Features:

  • Simple to use, single, dual-split and three phase power and energy logger
  • No LCD Display
  • Three MA193-10-BK Sensors included
  • Equipped with four powerful magnets for mounting the instrument on a metallic surface
  • 1000V CAT III and 600V CAT IV
  • Measurement of RMS voltages and currents at 128 times per cycle and stored every second
  • Power Measurements: VA, W and var
  • Energy Measurements: VAh, Wh (source load) and varh (quadrant indication)
  • Updated features in DataView software for configuring real-time communication with a PC and report generation with pre-defined or user defined templates
  • USB, LAN, Ethernet and Bluetooth (Class 1 wireless communication, up to 300 ft. away)
  • Minimal programming required
  • Satisfies the recommendations of NEC Code 220.87
  • Power adapter allows the PEL 102 to be powered from a phase measurement input
  • Provides all the necessary functions for power and energy data logging for 50Hz, 60Hz, 400Hz and DC distribution systems
  • Automatic recognition of the connected current sensors/probes


  • Measure efficiency, find areas for potential savings
  • Track sub-billing occupants for energy costs
  • Assign energy costs to departments or operations within a department
  • Track peak demand periods and find opportunities for surcharge reductions
  • Determine present capacity and circumvent unnecessary electrical expansion costs
  • Monitor stray voltages and neutral current
  • Verify the reliability and operation of electrical machinery
  • Improve response time to solve power related problems
  • Track energy availability and reliability of supply
  • Reduce field service time at sub-stations
  • Baseline studies for system upgrades in high-rise and office buildings
  • Remote configurations, monitoring and event loading
6 other products in the same category: