Digi-Sense WD-89800 Calibration Metrology
chevron_left chevron_right

Digi-Sense WD-89800

TC9100 Single-Loop Benchtop Temperature Controller for Thermocouples, Advanced PID, On/Off Control

$ 580.75 (tax incl.) $ 580.75 (tax excl.)
No tax


The Digi-Sense 89800-11 TC9100 Advanced PID and On/Off Temperature Controller is designed to regulate a user-defined output device at a set point temperature. The microprocessor control uses a PID algorithm that provides precise heating/cooling tolerances for demanding applications in the laboratory or industrial setting.

The TC9100 is a microprocessor-based, digital indicating, single-loop temperature controller. It has a single output located on the back of the controller. It features an auto-tuning function that allows automatic configuration of the PID parameters with minimum user configuration required. The TC9100 has a single thermocouple input that accepts J, K, N, R, S, T, B, and E sensors.

The controller automatically sets the PID parameters through a "learning" sequence in the auto tune mode. PID parameters include proportional band, reset/integral, and rate/derivative. The user-friendly LED display is to aid in monitoring and setup of the controller. The controller automatically stores all user-defined information in non-volatile memory.

New product
  • 1 - Grid Support bracket
  • 1 - 6 ft. detachable IEC power cord
  • 1 - US 120 VAC plug
  • 1 - Electrical noise canceling ferrite clip
  • 1 - User manual
  • 1 - Quick start guide

Product Features:

  • Simple on/off control to sophisticated auto-tuning PID control
  • Simultaneous view measured value and set point on two-line display
  • Front panel indicates output and alarm conditions
  • Grid support bracket ideal for fume hood mounting
  • Thermocouple (grounded or non-grounded)
  • Automatic cold junction compensation and break protection for sensor
  • Calibration Accuracy
    • Types J, K, T, E, N: +/- 0.1% of span of +/- 1 C
    • Types B, R, S: +/- 0.2% of span
6 other products in the same category: